Terrance is building his motor for a turbo setup we should be putting on soon. Here are the specs so far:

D16Z6
CP Pistons
Eagle Rods
ACL Racing bears (rod & crank)
ARP Headstuds
Cometic Headgasket
New Waterpump
New Oil pan, oil pickup and gasket
New Timing Belt
New crank seals

Will post pictures tomorrow.

I've been so busy with this build that I haven't had time to post pictures. But here you guys go. Had to do some custom work on the crank girdle for the rods bolts to clear. Other than that everything was in spec and went together pretty smooth.

Damage to Oilpan when motor mount broke


Grinding I had to do on the girdle for the rods



Block cleand and honed ready for pistons



CP Pistons installed


Motor assembled and ready to be lifted into the car

Well, motor got lifted in tonight, fired up great. Did the 20 mile break in, changed the oil and she is off to Nevada. We should be putting the turbo kit on here in a few weeks and tuning it and seeing what kind of power we can get. Very excited.

Well, got a slight hang up on this motor. Terrence hit something on the road and it broke his drivers side motor mount again. Pics below. Should be dropping the block off at a welding shop to see if they can weld the piece back on and retap the holes.